Brembo GP MK2 Pushrod Repair Kit/Crash Rebuild Kit - 110.4266.60
Clearance items from our stock.
Genuine Brembo repair kit for the pushrod unit of selected Brembo GP-MK2 and XR0 radial brake pumps.
This kit is particularly suitable for repairs after a fall or when the pushrod unit is damaged. It replaces the external components of the actuation system and restores the correct connection between the brake lever and the master cylinder.
Product details:
✅ Genuine Brembo spare part
✅ Article number: 110.4266.60
✅ Alternative notation: 110426660
✅ GP MK2 Pushrod Repair Kit
✅ Crash Rebuild Kit for the Pushrod Unit
✅ For selected Brembo radial brake pumps
✅ Suitable for racetrack, supermoto and racing applications
Scope of delivery:
-
Push rod
-
Snap ring
-
Pressure plate or top hat
-
Outer bellows/Outer boot
Compatible Brembo brake pumps:
GP MK2:
-
110.4760.70 – 19 x 18
-
110.4760.75 – 19 x 18
-
110.4760.60 – 19 x 20
-
110.4760.65 – 19 x 20
-
110.4760.52 – 18 x 18
-
110.4760.80 – 16 x 18
-
110.4760.82 – 16 x 18
-
110.4760.85 – 16 x 18
-
110.4760.87 – 16 x 18
XR0:
-
XR0.11.70 – 19 x 16
-
XR0.11.71 – 19 x 18
-
XR0.11.72 – 19 x 20
-
XR0.11.51 – 19 x 18
Important NOTE:
This repair kit replaces only the outer pushrod assembly. Internal seals, the piston, or other components of the brake master cylinder are not included.
In case of damage to the piston, the internal seals or the master cylinder, the brake pump must be inspected or repaired by an authorized Brembo service center.
Not suitable for:
-
Brembo RCS brake pumps
-
Brembo XR0 16 x 16
-
Brembo XR0 16 x 18, if the smaller XR0 pushrod version is required
A different repair kit is required for these versions.
Vehicle fit:
The fit is not directly dependent on the motorcycle model, but rather on the Brembo brake master cylinder actually installed. Therefore, the kit can be used on various motorcycles from the racing, supermoto, and performance categories, provided a compatible Brembo GP MK2 or XR0 brake master cylinder is fitted.
Please check before ordering:
-
Manufacturer and model of the brake pump
-
Brake pump part number
-
Translation, for example 19 x 18 or 19 x 20
-
GP MK2 or XR0 version
-
existing push rod or lever design
Condition of the clearance item:
The packaging may be open, labeled, or damaged. Loose parts may show slight signs of storage. The item is unused unless otherwise indicated in the product images.
Please compare your existing brake master cylinder and the part number before ordering. If you are unsure, please send us a photo of the brake master cylinder and its markings.